Technical and economic study was carried out for the remodeling and implementation of the distribution system in Medium and Low Voltage for networks of private service of the electrical installations of the village of Llacuabamba, District of Parcoy - Pat

Authors

  • Freyre Marcos Salinas Gabriel Universidad César Vallejo, Trujillo, Perú

Keywords:

Tension fall, Primary networking

Abstract

In the present work, a technical and economic study was carried out for the remodeling and implementation of the distribution system in Medium and Low Voltage for networks of private service of the electrical installations of the village of Llacuabamba, District of Parcoy - Pataz - La Libertad. The maximum electrical demand of the village of Llacuabamba was determined following the guidelines established by the Ministry of Energy and Mines. In order to corroborate this data, measurements were taken with a amperimeter clamp in the Distribution Boards of the two existing Substations. The enumeration and the plans were compiled by the communal president and COFOPRI, guaranteeing the best route and avoiding properties of third parties

causing a strip of unnecessary servitude. The justifying calculations that have been made have been aimed at the correct selection of the supply of materials complying with the current current regulations established by the Ministry of Energy and Mines. Concluding that this work has the pertinent information pertinent for the elaboration of the project to be presented in the Concessionary HIDRANDINA SA, taking into account the cost that would imply its execution.

Published

2017-12-30

How to Cite

Salinas Gabriel, F. M. (2017). Technical and economic study was carried out for the remodeling and implementation of the distribution system in Medium and Low Voltage for networks of private service of the electrical installations of the village of Llacuabamba, District of Parcoy - Pat. Innovación En Ingeniería, 3(1). Retrieved from https://revistas.ucv.edu.pe/index.php/innovacion/article/view/1800

Issue

Section

Mechanical and Electrical Engineering